<acronym id="meu6w"></acronym>
<tt id="meu6w"></tt>
<rt id="meu6w"><small id="meu6w"></small></rt>
<rt id="meu6w"><center id="meu6w"></center></rt>

Product Center

Security technology quick

Elegant product style, smooth lines, mature and reliable, advanced technology, security, science and technology, fast high-quality.

Lifting and traversing type -PSH

 Home > Products > Lifting and traversing type -PSH


  • Product introduction
    PSH model can be built on ground or underground according to different terrain. Number of layers ranges from two to five. Besides, one or two layers can be built underground. Number of columns can be decided according to terrain, and with consideration of customers’ demand. Modularized installation with flexible combination well meets different needs of users. It multiplies the parking capacity by extending the packing area from single layer to multiple layers. PLC control system makes easy operation and convenient access. It is featured by simple structure, reliable and stable operation. Vehicle safety is ensured by falling-proof device. Vehicle dimension and parking position is controlled by photoelectric detection, which keeps vehicles in order and delivers stop signal once people stray into.  Scram button can stop the whole equipment instantly in case of emergency.  There are several sling styles to be chosen, including motor chain, steel rope, back cantilevered, etc. With all these advantages, this model is suitable for various occasions, such as residential areas, enterprises, basements, etc.

     

    Working Principle:
    There is a loading pallet in each packing position. By lifting and sliding the loading pallet, the vehicle reaches the access position. The vehicles parking on the ground floor need no lifting, but just sliding in order to spare room for upper or lower layer. Then the loading pallet is lifted to the ground floor, where the driver can enter the garage for access.

     

    Characteristics:
    1. High availability, low requirement for construction
    2. Fast and convenient access
    3. Easy operation and maintenance, low cost
    4. Efficient utilization of space, flexible combination based on terrain and space
    5. New energy vehicles (EV) charging function available

  •  


     

Technical specification

Available vehicle dimension

Length(mm)

≤5000

Width(mm)

≤1850

Height(mm)

≤1550

Weight(kg)

≤1700

Sling

Steel rope or chain

Power

three-phase-five-wire AC 380V/50Hz

Power capacity

3.5kW

Motor

lifting

2.2kW With brake

sliding

0.2kW With brake

Loading pallet lifting speed(m/min)

4-6

Loading pallet sliding speed(m/min)

7-9

Parking distance W(mm)

2350-2500

Upright distance L(mm)

5500-5700

Technical requirement:
1. It refers to 2 layers 5 columns PSH equipment, ground style, with 4 uprights structure.
2. Uprights fixed to floor with expansion blots, floor thickness should be more than 200mm
In case that upright fixed with embedded plate, then further contact with the manufacturer is needed to check the loading condition and ensure the accuracy.
3. Parking area ground should be leveled by concrete.
4. The general position of power is on the rear left side of the equipment.

Technical specification

Parking distance W(mm)

2350-2500

Upright distance L(mm)

5500-5700

Note:
1. All requirements the same as ground style 2 layers PSH equipment, except the underground part.
2. The underground part should be well drained.
3. The dimension of a and b should be specific ally decided by the supplier
4. The type above is convenient for access as the loading pallet is flush with the ground.

Technical specification

Available vehicle dimension

Length(mm)

≤5000

Width(mm)

≤1850

Height(mm)

≤1550

Weight(kg)

≤1700

Sling

Steel rope or chain

Power

three-phase-five-wire AC 380V/50Hz

Power capacity

3.5kW

Motor

lifting

2.2kW With brake

sliding

0.2kW With brake

Loading pallet lifting speed(m/min)

4-6

Loading pallet sliding speed(m/min)

7-9

Parking distance W(mm)

2350-2500

Upright distance L(mm)

5500-5700

Technical requirement:
1. It refers to 3 layers 8 columns PSH equipment, 1 layer underground, 2 layers above ground.
2. Uprights fixed to floor with expansion blots, floor thickness should be more than 200mm
In case that upright fixed with embedded plate, then further contact with the manufacturer is needed to check the loading condition and ensure the accuracy.
3. Parking area ground should be leveled by concrete.
4. The stiffness of the pit wall should afford M16×150 expansion bolts.
5. The general position of power is on the rear left side of the equipment.

Available vehicle dimension

Length(mm)

≤5000

Width(mm)

≤1850

Height(mm)

≤1550

Weight(kg)

≤1700

Sling

Steel rope or chain

Power

three-phase-five-wire AC 380V/50Hz

Power capacity

5kW

Motor

lifting

2.2kW With brake

sliding

0.2kW With brake

Loading pallet lifting speed(m/min)

4-6

Loading pallet sliding speed(m/min)

7-9

Parking distance W(mm)

2400-2500

Upright distance L(mm)

5700-6200

Technical requirement:
1. It refers to 5 layers 21 columns PSH equipment, ground style.
2. Upright fixed to floor with embedded plate, equipment dimension requirement taken into consideration of construction design. Under special circumstance, further contact with the manufacture is needed.
3. The general position of power is on the rear left side of the equipment.
4. Steel frames and rails supplied by the equipment manufacturer.

Technical specification:

Available vehicle dimension

Length(mm)

≤5000

Width(mm)

≤1850

Height(mm)

≤1550

Weight(kg)

≤1700

Sling

Steel rope or chain

Power

three-phase-five-wire AC 380V/50Hz

Power capacity

3.5kW

Motor

lifting

2.2kW With brake

sliding

0.2kW With brake

Loading pallet lifting speed(m/min)

4-6

Loading pallet sliding speed(m/min)

7-9

Pillar shear loading(kN)

30

Parking distance W(mm)

2400-2500

Technical requirement:
1. It refers to 2 layers 5 columns PSH equipment, back cantilevered style.
2. Upright fixed to floor with embedded plate.
3. Parking area ground should be leveled by concrete.
4. The general position of power is on the rear left side of the equipment.
5. Equipment dimension requirement should be taken into consideration of construction design. Under special circumstance, further contact with the manufacture is needed.

 

 


 

 

欧美av无码高清在线 无码av高清毛片在线看 日本一级特黄大片